Sony VPL-HS3 - Manual (Page 10)

Con
n
ect
ions a
n
d
P
repar
ati
o
n
s
GB
10
Step 2: Connecting the Projector
To connect to a DVD player/digital tuner equipped with component video
connectors
You can connect a DVD player/digital tuner equipped with component video connectors using the supplied signal
interface cable.
Tips
• To connect the projector to a DVD player/digital tuner which is not equipped with component video connectors, use the S video cable of
the DVD player/digital tuner.
• To connect the projector to a DVD player/digital tuner which is not equipped with S video output, use the video cable instead of the S
video cable.
• To connect the projector to a DVD player/digital tuner equipped with a D connector, use a commercially available conversion cable.
To connect to a DVD player/digital tuner equipped with HDMI output
You can enjoy better picture by connecting a DVD player/digital tuner equipped with HDMI output to the HDMI
input of the projector.
Connecting to a DVD Player/Digital Tuner
P B /
C B
P R /
C R
Y S
Video Video
Signal interface cable (SIC-HS40, supplied)
: Video signal flow
DVD player, digital tuner, etc.,
with component video
connectors
Rear of the projector
with SONY logo upside
AV amplifier
Active
speakers
HDMI cable (not supplied)
: Video signal
flow
Rear of the projector
DVD player, digital
tuner, etc., with the
HDMI output
to HDMI output