Sony DSC-F505 User Manual
Page 37
37-GB
Various ways of recording
5
Select the desired shutter speed.
Note that the shutter speed is
indicated as, for example, “100”
for 1/100 shutter speed.
You can select from the following
12 speeds.
When you select “NTSC” in
“VIDEO OUT” in the SET UP
menu: 1/8, 1/15, 1/30,
1/60, 1/90, 1/100, 1/125, 1/180,
1/250, 1/350, 1/500, 1/725
When you select “PAL” in
“VIDEO OUT” in the SET UP
menu: 1/6, 1/12, 1/25, 1/50, 1/75,
1/100, 1/120, 1/150, 1/215, 1/300,
1/425, 1/600
For a faster shutter speed, select a
larger value indicator.
To cancel PROGRAM AE
Press PROGRAM AE repeatedly until
the indicator on the LCD screen goes
out.
P
Notes
• You can focus only on distance subjects
in Landscape modes.
• In Panfocus mode, the zoom position
and focus are fixed.
• When you record in the Twilight
+ (plus) mode we recommend that you
use a tripod to compensate for camera-
shake.
• Set the flash mode to forced-flash
when you use flash in the following
mode:
Twilight mode, Twilight + (plus) mode
or Landscape mode.
• When you record in the Twilight
+ (plus) mode, the picture may become
coarse momentarily just before your
camera focuses on a subject in the auto
mode. This is not a malfunction.
Using the Aperture Priority
mode
1
Press PROGRAM AE repeatedly
to select
.
2
Press v of the control button. The
menu bar appears on the LCD
screen.
3
Select ”CAMERA” with the
control button, then press it. The
CAMERA menu appears on the
screen.
4
Select “APERTURE” with the
control button, then press it.
5
Select the desired aperture value.
You can select from the following
7 value: F2.8, F3.4, F4.0, F4.8, F5.6,
F6.8, F8.0.
For a smaller aperture, select a
higher value.
P
Note
You cannot select F2.8 while you set the
zoom lever to “T” side.
Using the Shutter Priority
mode
1
Press PROGRAM AE repeatedly
to select
.
2
Press v of the control button. The
menu bar appears on the LCD
screen.
3
Select ”CAMERA” with the
control button, then press it. The
CAMERA menu appears on the
screen.
4
Select “SHUTTER SPEED” with
the control button, then press it.