Sony NW-MS9 - Manual (Page 16)

16
Locking the
controls (HOLD)
To prevent the controls from being
accidentally operated when you carry the
player, use this function.
Slide the HOLD switch in the direction
of the arrow.
No controls will be able to operate.
If you press buttons while the HOLD switch
is ON, “HOLD” appears in the display.
To release the Hold function
Slide the HOLD switch in the opposite direction of
the arrow.
HOLD switch
Changing the settings
To set a reasonable volume
(Volume preset functions)
There are two modes of adjusting the volume.
Manual mode: By pressing the “VOLUME
+/–” button, you can change
the setting from 0 to 31.
Preset mode: You can switch to any of
three preset levels: LO, MID,
or HI .
1
Press the MENU button.
The menu is displayed.
2
Press b or B of the Seesaw key to
display “VOL : MAN.”
3
Press (PUSH) of the Seesaw key.
“MAN” blinks.
4
Press b or B of the Seesaw key to
display “VOL : SET>.”
MENU
button
VOLUME +/– buttons
Seesaw key
Press (b)
Press (B)
Press (PUSH)
R E P : O F F
V OL : MAN
V OL : S E T >