Sony CDX-GT35UW User Manual

Page 9

Advertising
background image

9

K

(front panel release) button page 7

L MODE button page 11

To select the radio band (FM/AM).

M Receptor for the card remote

commander

N RESET button (located behind the front

panel) page 6

O ZAP button page 11

To enter ZAPPIN™ mode.

P BTM button page 11

To start the BTM function (press and hold).

Q Number buttons

CD/USB:
(1)/(2): ALBM –/+ (during MP3/WMA/
AAC playback)

To skip albums (press); skip albums
continuously (press and hold).

(3): REP* page 12, 13
(4): SHUF page 12, 13
(5): DM+

Improves digitally compressed sound,
such as MP3.
To activate the DM+ function, set
“ON.” To cancel, set “OFF.”

(6): PAUSE

To pause playback. To cancel, press
again.

Radio:
To receive stored stations (press); store
stations (press and hold).

R DSPL (display)/SCRL (scroll) button

page 12, 13
To change display items (press); scroll the
display item (press and hold).

S AUX input jack page 15

To connect a portable audio device.

* This button has a tactile dot.

Note
When ejecting/inserting a disc, keep any USB devices
disconnected to avoid damage to the disc.

The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 6).

w; < (.)/, (>) buttons

To control radio/CD/USB, the same as
(SEEK) –/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.

wa DSPL (display) button page 12, 13

To change display items.

ws VOL (volume) +*/– button

To adjust volume.

wd ATT (attenuate) button

To attenuate the sound. To cancel, press
again.

wf SEL (select) button

The same as the select button on the unit.

wg M (+)/m (–) buttons

To control CD/USB, the same as (1)/(2)
(ALBM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.

wh SCRL (scroll) button

To scroll the display item.

wj Number buttons

To receive stored stations (press); store
stations (press and hold).

* This button has a tactile dot.

Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE) on the unit is pressed, or a disc is
inserted to activate the unit first.

Advertising