Sony DCR-TRV520 - Manual (Page 56)

56
Searching for a photo – Photo search/Photo scan
Scanning photo
(1) Set the POWER switch to VTR.
(2) Press SEARCH MODE on the Remote Commander repeatedly, until the photo scan
indicator appears.
The indicator changes as follows:
DATE SEARCH
t PHOTO SEARCH t PHOTO SCAN
(3) Press . or >.
Each photo is played back for about 5 seconds automatically.
To stop scanning
Press x.
Note
The photo search and photo scan work only for tapes recorded in the Digital8 system.
If a tape has a blank portion in the recorded portions
The photo search and photo scan functions may not work correctly.
3
2
SEARCH
MODE
PHOTO 00
SCAN