Sony HDR-HC1 - Manual (Page 67)

67
Dubbing/Editing
HDR-HC1 2-631-458-11(1)
Recording pictures from a
VCR
You can record pictures from a VCR on
a tape. You can record a scene as a still
image on a “Memory Stick Duo.”
Be sure to insert a cassette or a “Memory
Stick Duo” for recording in your camcorder
beforehand.
• You need an i.LINK cable (optional) for this
operation. You cannot record pictures from any
jack other than HDV/DV Interface (i.LINK)
jack.
i.LINK cable
(optional)
to i.LINK (IEEE1394)
connector
to HDV/DV
Interface (i.LINK)
jack
:Signal flow
HDV1080i
compatible device
AV device with
i.LINK jack
HD quality SD quality
*
* i.LINK jack which is compatible with
HDV1080i specification is required.
Recording movies
1
Slide the POWER switch down to
turn on the PLAY/EDIT lamp.
2
Set the input signal of your
camcorder.
Set [VCR HDV/DV] to [AUTO]
when recording from an HDV format
compatible device.
Set [VCR HDV/DV] to [DV] or
[AUTO] when recording from a DV
format compatible device (p. 56).
3
Connect your VCR as a player to
your camcorder.
• When i.LINK cable (optional) is connected,
the format of the input signal (
or )will be indicated on
the LCD screen of your camcorder. (This
indicator may appear on the screen of the
playback device, however, they will not be
recorded.)
4
Insert the cassette into the VCR.
5
Operate your camcorder to
record movies.
Touch  [ REC CTRL]
 [REC PAUSE].
6
Start playing the cassette on your
VCR.
The picture played on the connected
device appears on the LCD screen of
your camcorder.
7
Touch [REC START] at the point
you want to start recording.
8
Stop recording.
When recording on a tape, touch
(STOP) or [REC PAUSE].
Continued 