Sony BDV-F7 - Manual

Quick Setup Guide
4-184-725-11(1)
BDV-F7
©2010 Sony Corporation Printed in Malaysia
1
Prepare the speakers
1. Connect the subwoofer speaker cord to the subwoofer.
Bottom of the subwoofer
Color tube (purple)
2. Thread the subwoofer speaker cord through the gap along the
side of the subwoofer, and secure it in the speaker cord holder.
3. Remove the screw of the cover at the rear of the front speaker,
and then remove the cover.
4. Connect the speaker cords for the front speaker.
The connector of the speaker cord is color-coded to the speaker channel. Connect
the connector of the speaker cord to match the color of the speaker jack.
L
R
Red (Front speaker (R))
White (Front speaker (L))
5. Guide the speaker cords through the square notch at the
bottom of the cover, and then reattach the cover to the
speaker and secure it with the screw removed in Step 3.
6. Connect the speaker cords to match the color of the SPEAKERS
jacks of the unit.
FRONT L SUBWOOFER FRONT R SPEAKERS
Red (Front speaker (R))
White (Front speaker (L))
Purple (Subwoofer)
2
Connect your TV and set-top box
5. Thread the AC power cord (mains lead) through the gap on the
bottom of the unit by securing it behind the tabs, and then
draw it around the rear support ().
FRONT L SUBWOOFER FRONT R SPEAKERS LAN(100) ANTENNA VIDEO OUT A UDIO L IN
R SA T/ TV FM75
CO AXIAL CABLE DIGIT AL IN (OPTICAL) HDMI OUT
FRONT L SUBWOOFER SPEAKERS
Tabs

6. Bundle the cables, AC power cord (mains lead), and the
speaker cords with the cable tie.
FRONT L SUBWOOFER FRONT R SPEAKERS
LAN(100) ANTENNA
VIDEO OUT A UDIO L IN R SA T/ TV
FM75
CO AXIAL
CABLE DIGIT AL IN (OPTICAL) HDMI OUT
Cable tie (supplied)
7. Attach the panel cover to the rear of the unit.
Put the corner of the panel cover on (), then slide it inward until it
clicks into place.
LAN(100) ANTENNA
VIDEO OUT AUDIO L IN
FM75 COAXIAL

8. Position the speakers.
3
Perform “Easy Setup”
Do not insert a disc before performing the “Easy Setup”.
1. Connect the AC power cord () and turn on the power ().


2. Insert batteries into the remote.
3. Turn on the TV, and switch the input selector on your TV so
that system screens like the ones below appear on the TV
screen.
Starting up “Easy Setup” screen
4. Perform basic settings by following the on-screen instructions
in “Easy Setup” using /// and .
8
0
9 7
5 6 4
2 3 1
///, 
[Easy Setup is now complete.] appears when “Easy Setup” is complete.
Depending on the jacks on your TV or set-top box, select the video and audio
connection method.
1. Hold the panel cover at (), then slide it out to the side.

2. Connect the video to your TV.
You can enjoy high-quality picture via the system by using an HDMI cable.
SAT/
TV CABLE
DIGITAL IN (OPTICAL)
LAN(100) ANTENNA
VIDEO OUT AUDIO L IN R
FM75 COAXIAL
HDMI OUT
ARC
HDMI
VIDEO IN
VIDEO OUT
HDMI OUT
ARC
HDMI cable*
Video cord
Or
*Not supplied
3. Connect the audio from your set-top box.
If you do not use a set-top box, refer to “Connecting the TV (Audio
connection)” in the Operating Instructions. You can enjoy high-quality
sound via the system by using a digital optical cord.
DIGITAL IN
(OPTICAL)
OUTPUT AUDIO OUT
R
L
OUTPUT
SAT/
TV CABLE
LAN(100) ANTENNA
VIDEO OUT AUDIO L IN R
FM75 COAXIAL
HDMI OUT
DIGITAL IN (OPTICAL)
AUDIO
L
IN
R
SAT/
TV
CABLE
DIGITAL IN (OPTICAL)
Audio cord*
Digital optical cord*
Or
*Not supplied
4. Bring together the cables, thread them through the gap on the
bottom of the unit, and then draw them around the rear
support ().
FRONT L SUBWOOFER FRONT R SPEAKERS LAN(100) ANTENNA
VIDEO OUT A UDIO L IN
R SA T/ TV
FM75
CO AXIAL
CABLE DIGIT AL IN (OPTICAL) HDMI OUT FRONT L SUBWOOFER FRONT R SPEAKERS
LAN(100)
ANTENNA
VIDEO OUT
A UDIO L IN R SA T/ TV
FM75
CO AXIAL
CABLE DIGIT AL IN (OPTICAL)
HDMI OUT
