Allied Telesis 86253-07 - Manual (Page 25)

Patch 86253-07 For Rapier Series Switches SHOW IGMPSNOOPING ROUTERADDRESS 25
Patch 86253-07 for Software Release 2.5.3
C613-10382-00 REV E
Features in 86253-02
Patch file details are listed in Table 5:
Patch 86253-02 includes the following enhancements and resolved issues:
It is now possible to prevent specified ports from acting as IGMP all-group
ports, and specify which ports are allowed to behave as all-group entry
ports. This is enabled with the ENABLE IP IGMP ALLGROUP command,
and disabled with the DISABLE IP IGMP ALLGROUP command.
For details, see “IGMP Snooping All-Group Entry” on page 31.
DHCP was offering network and broadcast addresses to clients. This issue
has been resolved.
The IP route filter did not always work correctly for OSPF. This issue has
been resolved.
Executing the DISABLE SWITCH PORT command on a port that was the
source of a mirror port did not disable the mirror port. This issue has been
resolved.
A fatal error occurred if the number of DVMRP interfaces being added
exceeded the limit. This issue has been resolved.
Occasionally a fatal exception may have occurred when sending BGP
aggregate routes. This issue has been resolved.
IGMP snooping entries were not being deleted from the hardware table.
This issue has been resolved. Also, port timers are now updated when the
IGMP timeout is changed.
The output of the SHOW DVMRP FORWARDING command did not
display the forwarding ports. This issue has been resolved.
Table 5: Patch file details for Patch 86253-02.
Base Software Release File 86s-253.rez
Patch Release Date 25-July-2003
Compressed Patch File Name 86253-02.paz
Compressed Patch File Size 190900 bytes
PCR: 03420 Module: IPG, SWI Level: 3
PCR: 03515 Module: DHCP Level: 3
PCR: 03609 Module: OSPF Level: 1
PCR: 03657 Module: SWI Level: 3
PCR: 03691 Module: DVMRP Level: 2
PCR: 03692 Module: BGP Level: 2
PCR: 03696 Module: IPG Level: 2
PCR: 03698 Module: DVMRP Level: 3