Specifications, General, System requirements for using sensme – Sony DSX-S210X User Manual

Page 31: Audio power specifications

Advertising
background image

31

Specifications

Tuner section

FM

Tuning range: 87.5 – 107.9 MHz
Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 150 kHz
Usable sensitivity: 10 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)
Separation: 40 dB at 1 kHz
Frequency response: 20 – 15,000 Hz

AM

Tuning range: 530 – 1,710 kHz
Antenna (aerial) terminal:

External antenna (aerial) connector

Intermediate frequency: 25 kHz
Sensitivity: 26 µV

USB Player section

Interface: USB (Full-speed)
Maximum current: 500 mA

Power amplifier section

Output: Speaker outputs
Speaker impedance: 4 – 8 ohms
Maximum power output: 52 W

× 4 (at 4 ohms)

General

Outputs:

Audio outputs terminal (front/rear)
Subwoofer output terminal (mono)
Power antenna (aerial) relay control terminal
Power amplifier control terminal

Inputs:

Remote controller input terminal
Antenna (aerial) input terminal
Telephone ATT control terminal
Illumination control terminal
BUS control input terminal
BUS audio input terminal
USB signal input connector (internal/external)

Power requirements: 12 V DC car battery

(negative ground (earth))

Dimensions: Approx. 178

Ч 50 Ч 180 mm

(7

1

/

8

Ч 2 Ч 7

1

/

8

in) (w/h/d)

Mounting dimensions: Approx. 182

Ч 53 Ч 163 mm

(7

1

/

4

Ч 2

1

/

8

Ч 6

1

/

2

in) (w/h/d)

Mass: Approx. 1.1 kg (2 lb 7 oz)
Supplied accessories:

Card remote commander: RM-X172
USB connector for iPod XA-50IP
Parts for installation and connections (1 set)

Optional accessories/equipment:

Source selector: XA-C40
USB connection cable for iPod: RC-100IP
HD Radio

TM

tuner: XT-100HD

Walkman adaptor XA-50WM

Your dealer may not handle some of the above listed
accessories. Please ask the dealer for detailed
information.

Design and specifications are subject to change
without notice.

System requirements for using
SensMe™

Computer

• CPU/RAM

– IBM PC/AT compatible machine
– CPU: Intel Pentium III Processor 450 MHz or

higher

– RAM: 256 MB or more (For Windows XP), 512

MB or more (For Windows Vista or later)

• USB port

OS

Windows XP, Windows Vista, Windows 7
For details on compatible editions or Service Pack, visit
the following support site:
http://esupport.sony.com
http://www.sony.com/mobileAV

Monitor

High color (16-bit) or more, 800

× 600 dots or more

Other

Internet connection

Notes
The following system environments are not

supported.
– Non IBM PC type computers, such as Macintosh,

etc.

– Homemade computers
– OS upgraded computers
– Multi-display environment
– Multi-boot environment
– Virtual machine environment

Depending on the computer condition, operation

may not be possible even with the recommended
environment.

CEA2006 Standard
Power Output: 17 Watts RMS
4 Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)

AUDIO POWER SPECIFICATIONS

4 at

Advertising