Specifications, The sound output from the subwoofer is very low, Wireless subwoofer (swf-br100) – Sony SWF-BR100 User Manual

Page 18

Advertising
background image

8

US

ˎ

ˎ Stays lit in red:

ˎ

- Check the location of the

subwoofer.

ˎ

- Do not place the TV and

subwoofer in a metal cabinet.

ˎ

- Place the subwoofer close to the

TV in a room.

ˎ

- Make sure that the wireless

transceiver is inserted correctly
into the TV.

ˎ

- Please confirm that power

setting of Wireless Subwoofer of
TV is Auto.

ˎ

ˎ Flashes in green or amber slowly

or turns red:

ˎ

- Make the Secure Link setting

again.

ˎ

- Sound transmission is poor.

Move the subwoofer so that the
power indicator turns green or
amber.

ˎ

ˎ Flashes in red:

ˎ

- Press power to turn off the

subwoofer, and check that
nothing is blocking the
ventilation slit of the subwoofer.
A protection function may act by
excessive input. Please lower TV
volume or the SW level.

Noise is heard from the

subwoofer or sound from the

subwoofer is intermittent.

ˎ

ˎ Move the subwoofer closer to the

TV.

ˎ

ˎ Do not install the TV and subwoofer

in a closed rack, on a metal rack, or
under a table.

ˎ

ˎ Move the subwoofer away from

other wireless devices.

ˎ

ˎ Avoid using any other wireless

devices.

The sound output from the

subwoofer is very low.

ˎ

ˎ Check the subwoofer level in the

sound setting of the TV.

ˎ

ˎ With some types of content such as

news there will not be a lot of bass
sound, this is normal.

Specifications

Wireless Subwoofer

(SWF-BR100)

Amplifier section
For U.S.A model:
(FTC)

With 4 ohms load, subwoofer

channel driven, from 30 - 150 Hz;

rated 45 W per channel minimum

RMS power, with no more than 1%

total harmonic distortion from 250

milliwatts to rated output.
POWER OUTPUT (reference)

100 W (per channel at 4 ohms,

100 Hz)
For Canadian and Mexican model:
POWER OUTPUT (rated)

70 W (4 ohms, 100 Hz, 1% THD)
POWER OUTPUT (reference)

100 W (4 ohms, 100 Hz)
Speaker System

Subwoofer, sealed enclosure
Speaker Unit

200 mm cone type
Rated impedance

4 ohms
Power requirements

120 V AC, 60 Hz
Power consumption

On: 30W

Standby mode: 0.5W or less
Dimensions (approx.) (w/h/d)

272 mm x 305 mm x 395 mm

10 3/4 in x 12 1/8 in x 15 5/8 in
Mass (approx.)

12.2kg

26 lb 14 3/10 oz

Advertising