Preparing the remote control – Sony HDPS-L1 User Manual
Page 13
Advertising
13
Pr
ep
ar
at
io
ns
Preparing the remote control
Pull out the insulating sheet, as illustrated.
When using the remote control, point it at the remote sensor on the unit.
To replace the battery
If remote control performance deteriorates, replace the battery with a new one.
Use the CR2025 lithium battery for the remote control.
1
Open the cover and remove the battery.
2
Insert a new CR2025 lithium battery.
When inserting a battery, make sure e of the battery is facing up.
3
Close the cover.
Insulating sheet
Pull out
Advertising