Sony MHC-RX55 - Manual (Page 23)

23
To Press
Check the CHECK on the remote
program repeatedly. After the last
track, “CHECK END”
appears.
Clear a track from CLEAR on the remote in
the end stop mode.
Clear a specific CHECK on the remote
track repeatedly until the
number of the track to be
erased appears, then press
CLEAR.
Add a track to the 1 Press one of the DISC
program 1 – 3 buttons or DISC
SKIP to select a CD.
2 Select the track by
turning the jog dial.
3 Press ENTER/NEXT.
Clear the entire
p once in stop mode or
program twice while playing.
Tips
• The program you made remains in the CD player
even after it has been played back. Press CD (P
to play the same program again.
• If the total playing time does not appear during
programming, this means:
– you have programmed a track number
which exceeds 20, or
– the total playing time has exceeded 100 minutes.
• “FULL” appears when you try to program over 32
tracks.
6
To program additional tracks,
repeat steps 3 to 5.
Skip step 3 to select tracks from the same
disc.
7
Press CD (P (or CD ( on the
remote).
All the tracks play in the order you
selected.
To cancel Program Play
Press PLAY MODE repeatedly until
“PROGRAM” or “SHUFFLE” disappears
from the display.