Allowing/blocking access from controller – Sony KDL-55W900A User Manual
Page 151
Font Size
> Allowing/blocking access from controller
Allowing/blocking access from controller
Overview
You can allow or block access from a specified controller.
Steps
1.
Press the HOME button, then select [Settings] using the / buttons.
2.
Select [Network] using the / buttons, then press the button.
3.
Select [Home Network Setup] using the / buttons, then press the
button.
4.
Select [Remote Device / Renderer] using the / buttons, then press
the button.
5.
Select [Renderer Access Control] using the / buttons, then press
the button.
6.
Select the controller using the / buttons to change the access
permission setting, then press the button.
7.
Select [Allow] or [Block] using the / buttons, then press the
button.
Select [Allow] to allow access from the controller. Select [Block] to
block access from the controller.
To return to the last viewed source, press the HOME button twice.
© 2013 Sony Corporation
153