Parts list, Installation tools, For use with the following sony models – Sony FWD-32LX1R User Manual
Page 4
SFM2
Page - 4 -
Installation Manual
Parts List
NOTE:
This wall mount is shipped with all proper installation hardware and components. Make sure that
none of these parts are missing and/or damaged before beginning installation. If there are parts
missing and/or damaged, please stop the installation and contact Sony Electronics
(877) 350-3477.
Adapter Plate
(Qty 1)
Ultra Flat Mount
(Qty 1)
M4 x 10mm
Phillips Pan
Head Screw
(Qty 4)
#10 x 1-1/4” Wood
Screws (Qty 4)
M6 x 12mm
Security Screws
(Qty 2)
6/32” x 1” Slotted
Screw (Qty 2)
M6 x 10mm
Phillips Head
Screws (Qty 4)
#10 Anchors
(Qty 4)
For use with the following Sony models
:
SONY
FWD-32LX1
FWD-32LX1R
NOTE:
Prior to installing the SFM2, the quick release sleeves (located on the back of the display) must
be removed. After removing them, please store them in a safe location for possible future re-use.
Installation Tools
Phillips Head Screw Driver
Portable Drill
¼” Drill Bit
Level (Supplied)
Soft Material/ Blanket
Pencil
Tape Measure
Wrench with ½” Drive Socket