Sony STR-DA3500ES - Manual (Page 94)

94 US
D:\NORM'S JOB\SONY HA\SO0046\STR-DA3500ES\U VERSION\US\4144907111\01US-
STRDA3500ESUC\090OTH.fm masterpage: Left
STR-DA3500ES
4-144-907-11(1)
5
Press V/v to select
“Zone2-ON”/“Zone3-ON” or
“Zone2-OFF”/“Zone3-OFF”,
then press
.
6
Press V/v/B/b repeatedly to
select item and parameter, then
press .
Note
You can only enjoy the sound in zone 3.
x Power
Lets you turn zone operation on.
• Zone2-ON or Zone3-ON
• Zone2-OFF or Zone3-OFF
x Input
Lets you select the source that is output to the
zone. You can output audio and video signals
to zone 2 and only audio signals are output to
zone 3.
x Volume
You can adjust the volume in the main zone. If
“Sur Back Assign” is set to “ZONE2” in the
Speaker setting menu, you can also adjust the
zone 2 volume.
x 12V Trigger
You can turn the receiver on/off in another
zone, or select various options for use of the
12V Trigger function, as explained below.
• OFF
Lets you turn off output of 12V triggers even
when the main receiver is turned on.
• CTRL
Lets you turn the output of 12V triggers on
or off manually using the CIS command of
the external control device.
• ZONE
Lets you turn the output of 12V triggers on
or off based on whether the selected zone is
turned on or off.
• INPUT (for “Main” only)
Lets you turn on the output of 12V triggers
when the preset input is selected.
When you select “Input”, the setting display
which sets each input trigger to on/off
appears. Press
V/v to select the input, then
press to check the box.
Note
You cannot select FM/AM/XM/SIRIUS/DMPORT
in zone 3.
Tips
• Even when this receiver is in standby mode (press
?/1 on the remote to turned off this receiver), the
receiver in zone 2 or zone 3 remains turned on. To
turn off all receivers, press ?/1 and AV ?/1 on the
multi function remote at the same time (SYSTEM
STANDBY).
• Only signals from components connected to the
analog input jacks are output through the ZONE 2
OUT or ZONE 3 OUT jacks. No signals are output
from components connected to only the digital
input jacks.
• When SOURCE is selected, the signals input to the
MULTI CHANNEL INPUT jacks are not output
from the ZONE 2 OUT or ZONE 3 OUT jacks
even when the multi channel input is selected. The
analog audio signals of the current function are
output.
Multi Zone menu parameters