Sony DCR-DVD910 - Manual (Page 57)

57
E
d
it
in
g
Dubbing movies to VCR or DVD/HDD recorders
You can dub movies played back on your camcorder to other recording devices, such as VCRs
or DVD/HDD recorders. Connect the device in either of the following ways.
Connect your camcorder to the wall outlet (wall socket) using the supplied AC Adaptor for
this operation (p. 20). Refer also to the instruction manuals supplied with the devices to be
connected.
b Notes
• Since dubbing is performed via analog data transfer, the image quality may deteriorate.
A A/V connecting cable (supplied)
Connect to the input jack of the other
device.
B A/V connecting cable with S
VIDEO (optional)
When connecting to the other device via
the S VIDEO jack, by using an A/V
connecting cable with S VIDEO
(optional), higher quality movies can be
produced than with an A/V connecting
cable. Connect the white and red plugs
(left/right audio) and the S VIDEO plug
(S VIDEO channel) of the A/V
connecting cable with S VIDEO
(optional). The yellow plug connection
is not necessary. Connecting only the S
VIDEO plug will not output audio.
b Notes
• To hide the screen indicators, such as a counter
on the screen of the monitor device connected,
Connecting a device with the A/V connecting cable
S VIDEO
VIDEO
AUDIO
(Yellow)
(White)
(Red)
IN
VIDEO
AUDIO
(White)
(Red)
IN
Device without
S VIDEO jack Device with
S VIDEO jack
VCRs or DVD/HDD recorders
: Video/Signal flow
A/V Remote
Connector
Continued ,