Sony DPT-S1 - Manual (Page 58)

58
Cannot find the access point in the Wi-Fi networks
list.
 The access point you want to use is set to not
broadcast its SSID to users. In this case, the access
point may not be shown on the Wi-Fi network list.
Tap [Add Wi-Fi Network] and enter the SSID
manually (page 42).
Network drive
Cannot find the destination.
 Check the network connection (page 57).
 There is a problem with the Destination folder (path
on the server) or network drive. Check with the
network administrator.
 When selecting [Reply], the Digital Paper device
identifies the sender by the file name automatically.
Check that the destination name is in the
Destination folder list (page 45).
Browser
A Web page is not displayed properly.
 The Wi-Fi network connection may have been
interrupted. Make sure that Wi-Fi is turned on and
set up correctly, check the signal strength of the
access point, then refresh the Web page.
 Due to the vast range of standards and
technologies used to design Web pages, it is not
possible to guarantee that all pages will be
displayed correctly.
 When you pinch in/out to zoom in/out a Web page,
the screen may be too bright to read. This is not a
malfunction.
Reading Documents
Cannot open a document.
 The document may be an unsupported file type. For
details on supported file types, see page 66.
[Return to Viewer] does not work, or the page flag is
missing.
 If the file status has changed (such as in the case
below), data under [Return to Viewer] or notes may
be deleted.
A PDF file is edited.
Cannot find content on the Digital Paper device.
 If you have formatted the device on your computer,
the device may not be able to display transferred
content. In this case, use the device’s [Format
Memory] function to reformat the device (page 54).
 If you delete or modify folders or files in the
“database” folder on your computer, content or
notes may be deleted.
Cannot annotate a document.
 When a document is protected or opened as read-
only, annotating/editing/saving/deleting cannot
be done.
 The document is opened as read-only. This is
indicated by the tab.
The file is read-only.
There may not be enough space in the internal
memory or microSD card.
The remaining battery charge is too low.
Cannot open sticky notes by the stylus.
 To open a sticky note, tap it with a finger, with the
stylus while pushing the button, or tap the sticky
note in the toolbox.
Connecting to Your Computer
The computer does not detect the Digital Paper
device.
 It may take a while for the computer to detect the
device.
 Make sure that the device is connected directly to
the USB port with the supplied USB cable. Do not
use a USB hub.
 Try connecting to a different USB port on the
computer.
 Try disconnecting the device and connecting it
again.
 If none of the above solves the problem, reset the
device (page 55).
Cannot transfer content to the Digital Paper device.
 There may not be enough space on the device or
the memory card. Check [About] for the amount of
free space on internal memory (page 54). Delete
some content, or copy it to your computer to make
some space on the device or memory card.