Sony PCM-D1 - Manual (Page 38)

Using a “Memory Stick PRO (High Speed)”
(not supplied)
You can record audio using a “Memory Stick
PRO (High Speed)” instead of the built-in
memory of the recorder.
“Memory Stick PRO (High Speed)” is the
only “Memory Stick” that can be used for the
recorder. Note that other kinds of “Memory
Stick” are not supported.
Inserting a “Memory Stick PRO
(High Speed)”
Before recording, be sure to copy all the
data saved in the “Memory Stick PRO (High
Speed)” to a computer and format the
“Memory Stick PRO (High Speed)” on the
recorder so it contains no data.
1
Open the cover of the Memory Stick slot.
2
Insert the “Memory Stick PRO (High
Speed)” into the Memory Stick slot firmly
until it clicks in the direction shown in the
illustration on the left, and close the
cover.
When you insert the “Memory Stick PRO
(High Speed)” into the recorder
“ACCESSING MEMORY” appears in the
display, and the ACCESS indicator flashes.
Information for operation is read in the
“Memory Stick PRO (High Speed).”
To remove the “Memory Stick PRO (High
Speed)”
Be sure that the ACCESS indicator light is
off, and then push the “Memory Stick PRO
(High Speed)” into the recorder. When it
pops out, remove it from the slot.
ACCESS
indicator
“Memory Stick PRO
(High Speed)” *
Memory Stick slot
Cover of Memory
Stick slot
* When you use “Memory Stick PRO Duo
(High Speed),” be sure to use the
Memory Stick Duo adaptor.
38
PCM-D1. US. 2-664-971-11(1)
Additional Information