Media center recorded the wrong show or channel, Media c enter recorded the wrong show or channel – Sony PCV-RZ44G User Manual

Page 269

Advertising
background image

Media Center recorded the wrong show or channel

If you receive your TV signal through a set-top box, then Media C enter might encounter an error when changing channels to begin
recording a show. The automatic behavior that some set-top boxes have affects Media C enter's ability to control the set-top box. When
Media C enter tunes to a channel that is not part of your TV service package, the set-top box might instead:

C hange to a default channel

Display an onscreen error

Remain on the last viewed channel

C hange to the closest viewable channel

In all cases, the set-top box performs a default action that Media C enter cannot detect and causes Media C enter to get out of sync and
record the wrong channel.

Note In the case of an onscreen error, no further channel navigation for recording TV is possible until you take action with the

set-top box remote. The error might cause several incorrect recordings if you are away from your computer and unable to correct
the problem immediately.

To prevent Media C enter from trying to access and record channels that you do not subscribe to, you should turn off the channels that
are not included in your television service package.

To turn on or turn off channels in the Guide lineup

1.

Press the START

button on the remote, and then select Settings.

2.

Select TV.

3.

Select Guide.

4.

Select Edit Guide listings.

5.

Use the arrow buttons on the remote to scroll through the list and locate the channels that you want to show or hide. As you select
each channel, the

inset window

displays that channel.

6.

Select or clear the check box next to each channel. When the box is checked the channel displays in the Guide; when the box is
cleared the channel does not display.

Note Select Select all or Clear all to quickly select or clear all the check boxes on the Edit C hannels page.

7.

Select Sav e when you have completed your changes to return to the Guide Settings page.

Tip Select Edit numbers and then select Restore default to remove all changes made to the Guide lineup.

© 2000-2003 Microsoft C orporation. All rights reserved.

Page 269

Advertising