Sony LBT-W900AV - Manual (Page 6)

6
Inserting two R6 (size AA)
batteries into the remote
Tips
• With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
• When you set the time, the demonstration is
deactivated.
To activate the demonstration again, press
DISPLAY (for LBT-W900AV/XB800AV only) or
DEMO (STANDBY) (for other models) while the
system is off.
Note
If you do not use the remote for a long period of
time, remove the batteries to avoid possible damage
from battery leakage.
When carrying this system
Do the following to protect the CD
mechanism.
1 Press FUNCTION repeatedly until “CD”
appears in the display.
2 Hold down LOOP and press 1/u to turn
off the system.
3
If your system has a VOLTAGE
SELECTOR on the rear panel, set it
to the position of your local power
line voltage.
4
Connect the power cord to a wall
outlet.
The demonstration appears in the
display.
If the supplied adapter on the plug does
not fit your wall outlet, detach it from
the plug (only for models equipped with
an adapter).
5
Deactivate the demonstration mode
by pressing DISPLAY (for LBT-
W900AV/XB800AV only) or DEMO
(STANDBY) (for other models)
while the system is off.
To attach the center speaker feet
Attach the four center speaker feet (supplied)
to the bottom corners of the center speaker.
To connect optional AV
components
See page 44.
VOLTAGE SELECTOR
220V
120V
230
240V -
Step 1: Hooking up the system
(continued)
}
]
]
}