AEG KO-LAVAMAT 88840 - Manual (Page 42)

Operating Instructions
42
Water cooling
It may be necessary to cool the water before draining, to prevent ther-
mal damage to the plastic outlet pipes.
3 The water is cooled before draining out at the end of the main wash
(by adding cold water).
(This setting is only available with the COTTONS/LINEN, EASY-CARES
programmes, with temperatures over 40 °C.)
When the washing machine is delivered, water cooling is not set, except
for the SENSITIVE programme option.
To set the water cooling function:
0 1. Turn the programme selector to SHORT SPIN.
2. Press and hold the PRE WASH button for at least 5 seconds.
When the button has been pressed for 5 seconds, MAIN WASH flashes
on the Programme Progress display for 5 seconds.
3. While MAIN WASH is flashing, release the PRE WASH button.
When it stops flashing, water cooling has been set. The function re-
mains set until cancelled again.
4. If you want to check whether water cooling has been set:
– Turn the programme selector to SHORT SPIN.
– Press the PRE WASH button briefly.
If MAIN WASH flashes on the Programme Progress display, water cool-
ing has been set.
To cancel water cooling:
0 1. Turn the programme selector to SHORT SPIN.
2. Press and hold the PRE WASH button for at least 5 seconds.
As soon as the button is pressed, MAIN WASH flashes on the Pro-
gramme Progress display. After 5 seconds, MAIN WASH stops flashing
and remains lit continuously for another 5 seconds.
3. While MAIN WASH is lit continuously, release the PRE WASH button.
When MAIN WASH is no longer lit, water cooling has been cancelled.
3 The water cooling function raises water consumption and extends pro-
gramme time.