Sony EBS-SP10 - Manual (Page 14)

SP-TUNE User Manual
13
channel browsing using channel +/- buttons (so that a user browses through the
defined channels only). Note that before this operation SP-TUNE must be
connected to RF-antenna or cable TV.
Add/Remove Channels – Allows user to add or remove channels (edit the “validity mask”)
manually.
Map A/V Input to Channel – Allows user to make an association between a channel number and the
AV inputs.
8.7 Panel Settings
This menu controls various aspects of interaction with Sony Plasma Display through the RS-232
port. This menu is accessible in Service mode only (not in Stand-alone).
All these parameters do not affect behavior of SP-TUNE, they are transferred to Display Panel in
control packets over the serial port and should be interpreted by Display Panel. If the panel control is
disabled, all other options effectively do not affect anything.
Note that for the serial control interface to work, the Display Panel must be connected to SP-TUNE
using the RS-232 cable.
Model
-- This option controls the RS-232 protocol for the model selected and defaults the
position, size, brightness, contras and RGB gains best suited.