Sony RDP-X500IP - Manual (Page 2)

Playing an iPod
Compatible iPod models
The compatible iPod models are as follows.
Update software of your iPod to the latest version
before using it with this unit.
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod nano (6th generation)*
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod classic
iPhone 4S
iPhone 4
iPhone 3GS
iPhone 3G
iPad 2
iPad
* The iPod nano (6th generation) cannot be
controlled by the remote when the command of
“MENU,” “,” “,” and “ENTER” is pressed.
On copyrights
iPhone, iPod, iPod classic, iPod nano, and iPod
touch are trademarks of Apple Inc., registered in
the U.S. and other countries. iPad is a trademark
of Apple Inc.
“Made for iPod,”“Made for iPhone,” and “Made
for iPad” mean that an electronic accessory
has been designed to connect specifically to iPod,
iPhone, or iPad, respectively, and has been
certified by the developer to meet Apple
performance standards. Apple is not responsible
for the operation of this device or its compliance
with safety and regulatory standards. Please note
that the use of this accessory with iPod, iPhone,
or iPad may affect wireless performance.
To set an iPod on the Docking
Tray
1 Press the Docking Tray on the front of
the unit to open it.
2 Set your iPod on the Dock connector.
Note
 If a pop-up message appears on the display of
the iPod touch/iPhone/iPad, see “About App.”
To close the Docking Tray
1 Remove the iPod from the Dock
connector.
2 Press the Docking Tray on the front of
the unit until it is locked.
To play back
Press .
The iPod begins to play back.
You can operate the connected iPod via this unit
or the iPod itself.
Notes
 Remove the case or cover from your iPod
before setting it in the Docking Tray to ensure a
stable connection.
 When placing or removing the iPod, hold the
iPod at the same angle as that of the connector
on this unit, and do not twist or bend the iPod
as it may result in connector damage.
 Do not carry the unit with an iPod set on the
Docking Tray. Doing so may cause a
malfunction.
 When placing or removing the iPod, hold the
Docking Tray securely.
 Before disconnecting the iPod, pause playback.
 If the battery of your iPod is extremely low,
charge it for a while before operation.
 Sony cannot accept responsibility in the event
that data recorded to an iPod is lost or damaged
when using an iPod connected to this unit.
 For details of environmental conditions for
operating your iPod, check the website of Apple
Inc.
To adjust the volume
Press VOLUME +/− (VOL +/− on the remote
commander).
Tip
 The Reaction indicator flashes three times
when the volume is set to either maximum or
minimum volume.
Connecting optional
components
You can enjoy the sound from an optional
component, such as a portable digital music
player, through the speakers of this unit. Be sure
to turn off the power of each component before
making any connections.
1 Firmly connect the line output jack of a
portable digital music player (or other
component) to the AUDIO IN jack on the
back of the unit, using a suitable audio
connecting cable (not supplied).
2 Press  to turn on the unit.
3 Turn the connected component on.
4 Press AUDIO IN to select the source.
5 Play the connected component.
The sound from the connected component is
output from the speakers of this unit.
Notes
 The audio connecting cable required depends
on the external equipment. Make sure the cable
is correct for the external equipment to be
connected.
 If the volume is low, adjust the volume level on
the connected equipment first. If the volume is
still too low, adjust the volume level on the unit.
About App
A dedicated dock app for iPod touch, iPhone, and
iPad available at Apple App Store.
Search for “D-Sappli” and download the free app
to find out more about the functions.
Features
 The Sound EQ function allows you to create
your own equalizer settings. You can select
equalizer presets, or customize settings to your
taste.
This function is available only when the iPod
touch/iPhone/iPad is set on the Dock
connector.
 D-Sappli includes two timer functions: Music
Play Timer and Sleep Timer.
The Music Play Timer allows you to play/pause
desired music at a desired time. The Sleep
Timer allows you to specify a time at which to
stop music playback. The Music Play Timer and
Sleep Timer work in combination with the
power supply of the unit.
 D-Sappli also includes a clock display enlarge
feature.
Notes
 If the App to link with this unit is not
downloaded to your iPod touch/iPhone/iPad, a
pop-up message prompting you to download
D-Sappli may appear repeatedly.
Deactivate the App’s link function to stop the
pop-up message.
 To deactivate the App’s link function: Connect
the AC adaptor, and then press / to turn on
the unit. Remove your iPod touch/iPhone/iPad
from the Dock connector, and then press and
hold VOLUME − and  simultaneously for
more than 2 seconds. (The indicator for iPod
flashes rapidly when deactivated.)
 To re-activate the App’s link function, repeat the
above steps. The indicator for iPod will flash
slowly.
 When you remove the iPod touch/iPhone/iPad
from the docking tray, the Sound EQ function
setting will return to the default.
 When the sound volume is high, the Sound EQ
function may not be effective.
Additional Information
Troubleshooting
General
The power does not turn on when the AC
adaptor is connected.
Make sure the AC adaptor is connected to the wall outlet
firmly.
There is no audio.
Adjust VOLUME +/− (VOL +/− on the remote
commander).
Noise is heard.
Ensure that the unit is not in the vicinity of in-use
portable phones, etc.
Resetting the unit (default setting).
Press / to turn on the unit. Remove your iPod from the
Dock connector, and then while holding down VOLUME
−, hold down /. (Hold both buttons down for at least 5
seconds.) After resetting, the / indicator flashes for 2
seconds.
All indicators flash and no buttons can be
operated.
Remove the AC adaptor and connect it again.
iPod
There is no audio.
Make sure the iPod is connected firmly.
Update your iPod to use the latest software beforehand.
Make sure the iPod is compatible.
Make sure the function for iPod is selected.
Operation is not performed.
Make sure the iPod is connected firmly.
The iPod does not charge.
Make sure the iPod is connected firmly.
Make sure the AC adaptor is connected firmly.
AUDIO IN
There is no audio.
Make sure the audio connecting cable is connected
firmly.
Make sure the AUDIO IN function is selected.
The sound is low.
Confirm the volume of the connected external
component.
Remote commander
The remote commander does not function.
Replace the battery in the remote commander with a new
one if it is weak.
Make sure that you are pointing the remote commander
at the remote sensor on the unit.
Remove any obstacles in the path of the remote
commander and the unit.
Make sure the remote sensor is not exposed to strong
light such as direct sunlight or fluorescent lamp light.
Move closer to the unit when using the remote
commander.
If the problem persists, consult your nearest Sony dealer.




















Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 8 ohm loads Satellite channels and with 4
ohm loads Subwoofer channel driven, from
100 Hz - 10,000 Hz; rated 10 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion.
Section for iPod
DC out: 5 V
MAX: 2.1 A
General
Speaker
Satellite: 4.8cm (1 15 /
16
inches) dia. 8Ω
Subwoofer: 9.0cm (3 5 /
8
inches) dia. 4Ω
Input
AUDIO IN jack (ø 3.5 mm stereo minijack)
Power output
15 W + 15 W + 30 W (at no more than 10%
harmonic distortion)
Power requirements
DC IN 19.5 V
Dimensions
Approx. 401 mm × 176 mm × 160 mm (w/h/d)
(15 7 / 8 inches × 7 inches × 6 3 / 8 inches)
Mass
Approx. 3.15 kg (6 lb 15 oz)
Supplied accessories
Remote commander (1)
AC adaptor (1)
AC power cord (1)*
Reference Guide (this document) (1)
Startup Guide (1)
CR2025 lithium battery (1) (Pre-installed in the
remote commander for trial use)
* The supplied AC power cord may differ to the
illustration depending on the country.
Design and specifications are subject to change
without notice.