Sony MVC-CD1000 User Manual
Page 69
masterpage:Right
filename[D:\MVC-CD1000 kaihan\3062473121\3062473121MVCCD1000UC\02GB-
MVCCD1000UC\10add.fm]
Ad
dition
al
in
fo
rma
tion
69
model name1[MVC-CD1000]
[3-062-473-12(1)]
The flash does not work.
•
The flash is set to
.
t Set the flash to (no indication),
, or
•
The camera is in one of the following PROGRAM
AE modes: Twilight, Twilight plus, or Landscape.
t Cancel the PROGRAM AE function or set the
flash to
•
The PLAY/STILL/MOVIE selector is set to
MOVIE.
t Set it to STILL.
•
The flash is not popped up.
t Pop up the flash (page 22).
The date and time are
recorded incorrectly.
•
The date and time are not set correctly.
t Set the correct date and time (page 12).
Vertical streaks appear
when you are shooting a
very bright subject.
•
This is called the smear phenomenon.
t This is not a malfunction.
The battery life is short.
•
You are recording/playing back images under
extremely cold temperatures.
•
The battery pack is not charged enough.
t Charge the battery pack fully.
•
The battery pack is dead.
t Replace the battery pack with a new one.
The indication of the
battery remaining time is
not proper.
•
You are using the camera for many hours under
extremely hot or cold temperatures.
•
The battery pack is dead.
t Replace the battery pack with a new one
(page 8).
•
The battery level is too low.
t Install the charged battery pack (page 8, 9).
The power is immediately
turned off even if the
battery remaining
indicator indicates that the
battery level is sufficient.
•
—
t Charge the battery pack about one hour after the
normal charge is complete (page 9).
The zoom does not work.
•
PROGRAM AE is set to the Panfocus mode.
t Cancel the Panfocus mode (page 51).
Digital zoom does not
function.
•
You cannot use digital zoom to record moving
pictures.
Symptom
Cause and/or Solution
01cov.book Page 69 Wednesday, July 19, 2000 10:33 AM