Sony ALT-SA31iR - Manual

4-147-128-11(1)
Universal Dock Adapters for iPhone (2)
Other contents
 Operating Instructions (4)
 Warranty (1)
 : for iPhone 3G  : for iPhone
The adapter number is shown on the bottom of the Dock Adapter.
For iPod models except iPhone and iPhone 3G, use the adapter supplied with
your iPod, or purchase a compatible Dock Adapter from Apple Inc.
Wireless transceivers (3)
4. Connect the AC power supply cords
(), and turn on the power () for
both units.
ST AN DB Y

 to a wall socket
 to a wall socket

Once the S-AIR connection is established,
– the S-AIR indicators on the Wireless Speakers
light up.
– “S-AIR” appears in the display of the S-AIR
Remote Commander. Press DISPLAY if the
display is turned off.
2
Attach the iPod/iPhone
1. Insert a Universal Dock Adapter.
Use one of the supplied Universal Dock Adapters
with this system for iPhone and iPhone 3G. To
use other iPod models, use the adapter supplied
with your iPod model, or purchase a compatible
Dock Adapter from Apple Inc.
2. Place the iPod/iPhone.
3
Play a Track
Press  on the S-AIR Remote
Commander to start playing the
iPod/iPhone, and press VOLUME +/– to
adjust the volume.
STAND BY
STAND BY
You can enjoy listening to the iPod/iPhone
using the S-AIR connection.
 For iPod/iPhone operation, refer to the user’s guide of your iPod/iPhone.
 For more details, including how to operate the tuner and other functions, refer
to the Operating Instructions supplied with this system.
LR6 (size AA) batteries (4)
S-AIR Remote Commander
(AIR-RM10) (1)
Check the package contents
Wireless Audio Transmitter
(AIR-SA17Ti) (1)
R03 (size AAA) batteries (4)
FM lead antenna (1)
Wireless Speakers (AIR-SA50R) (2)
STANDBY
STANDBY
Remote for AIR-SA50R (1)
Remote for AIR-SA17Ti (1)
1
Prepare for use
1. Insert the wireless transceivers into
the Wireless Audio Transmitter and the
Wireless Speakers.
ST A ND BY
 mark facing up
Insert securely until they click.
2. Insert the four supplied LR6 (size AA)
batteries into the S-AIR Remote
Commander.
3. Set the S-AIR ID on each unit to “A.”
ST AN DB Y
The S-AIR ID on each unit is set to “A” at the
factory.
You can easily establish a connection between
units by setting the same S-AIR ID on each one.
©2009 Sony Corporation Printed in China
Quick Setup Guide
ALT-SA31iR