Sony ICD-BP120 - Manual (Page 48)

48
Connecting the IC Recorder to Your
Computer
Connect the IC recorder to the USB connector of your computer using the
supplied USB cable.
Note
Be sure to install the “Digital Voice Editor” Software before connecting the
IC recorder to your computer.
To IC recorder
USB connector Connecting cable
(supplied)
Your computer
To the USB connector
of your computer
IC recorder
USB connecting cable can be connected or disconnected when the IC
recorder and the computer are turned on or off. The IC recorder is
recognized by the computer as soon as the cable is connected, enabling
you to proceed with the operation.
Notes
• Do not connect more than two USB devices to your computer. Normal
operation will not be guaranteed.
• Use of this IC recorder with a USB hub or a USB extension cable is not
guaranteed.
• A malfunction may occur depending on the USB devices connected at any one
time.
• Check the remaining battery power of the IC recorder (more than one segment
of the battery indicator should be on) before connecting the IC recorder to the
computer. If the batteries are exhausted, communication between the IC
recorder and the computer may not succeed.
• We recommend you disconnect the cable from the computer when you do not
use the Digital Voice Editor.