Sony PCG-XG9 - Manual (Page 59)

Using a Second Battery Pack 47
To charge the second battery pack
Keep the battery pack in the computer while it is connected to AC power.
The battery indicator flashes while the battery is charging. See also “To
charge the battery pack” on page 21 for more information.
To remove the second battery pack
1
There is a RELEASE lever on the bottom of the weight saver. To
remove the battery pack, slide the RELEASE lever on the bottom of
the computer in the direction of the arrow. See also “To remove the
floppy disk drive” on page 34.
2
Remove the weight saver, and then pull out the battery pack.
3
Reinsert the weight saver.
✍
If you attach two battery packs, you can remove either of them without shutting down the
computer. When removing one battery pack, make sure that the other battery pack's
indicator is on. If the indicator of the battery pack you are going to remove is on, right-
click
in the task tray and switch it in the “Select the battery pack in use” window.
Second battery pack
(not supplied)
Battery indicators
Battery pack (supplied)
RELEASE lever