Sony STR-DA2800ES - Manual (Page 103)

103 US
Ad
ju
st
ing
Setti
ng
s
x AMP
The HDMI audio signals from the playback
equipment is only output to speakers
connected to the receiver. The multi-channel
sound can be played back as it is.
Note
When “Control for HDMI” is set to “On,” “Audio
Out” may be changed automatically.
Lets you turn the function which controls
equipment connected to the HDMI jack using
an HDMI cable on or off.
x Off
x On
Note
This function is enabled only when “Zone2 Out” is
set to “Off.”
Lets you output HDMI signals to the TV even
when the receiver is in standby mode. For
details, see “Outputting the HDMI signals
even when the receiver is in standby mode
(Pass Through)” (page 80).
x Off
x On
x Auto
Lets you enable or disable the HDMI ZONE 2
OUT jacks.
x Off
x On
Lets you set the priority when you select the
same input for both the main zone and zone 2.
x Main & Zone 2
You can enjoy the same input in the main zone
and zone 2. However, there may be some
interference in the audio and video signals in
the main zone and zone 2.
x Main Only
You can enjoy good audio and video quality in
the main zone. There is no output in zone 2.
Note
This function is enabled only when “Zone2 Out” is
set to “On.”
Lets you set the operation of Fast View.
HDMI IN 1, IN 2, IN 3, and IN 4 support the
Fast View function.
x Auto
You can select HDMI Input faster than with
the normal selection.
x Off
This function and the Preview for HDMI
function are not available.
Note
This function is enabled only when “Zone2 Out” is
set to “Off.”
Control for HDMI
Pass Through
Zone2 Out
Priority
Fast View (Fast HDMI Switching)