Connecting the telephone and modem cables – Sony PCV-RZ40C User Manual
Page 21
Connecting the Telephone and Modem cables
1.
Unplug your telephone from the wall jack and plug it into the telephone jack, located on the back panel of your
computer.
2.
Plug the modem cable (supplied) into the Modem line jack, located on the back panel of your computer.
3.
Plug the other end of the modem cable into the wall jack.
To connect the telephone and m odem cables
Your computer has a protective sticker
covering the Ethernet port located on the rear panel.
Connect 10BASE-T, 100BASE-TX or 1000BASE-TX cables to the Ethernet port. Using other cables or a telephone
cable may result in an electric current overload that can cause a malfunction, excessive heat, or fire in the
Ethernet port. For help on connecting to a network, see your network administrator.
Page 21