Sony KDL-32VL140 - Manual (Page 46)

46
Specifications
* While the TV is collecting TV Guide data and/or during software update the power consumption is less than 30 W.
~
• Optional accessories availability depends on its stock.
• Design and specifications are subject to change without notice.
Model KDL-32VL140
System
Television system NTSC: American TV standard
ATSC (8VSB terrestrial): ATSC compliant 8VSB
QAM on cable: ANSI/SCTE 07 2000 (Does not include CableCARD functionality)
Channel coverage Analog terrestrial: 2 - 69 / Digital terrestrial: 2 - 69
Analog Cable: 1 - 135 / Digital Cable: 1 - 135
Panel system LCD (Liquid Crystal Display) Panel
Speaker output 10 W + 10 W
Input/Output jacks
CABLE/ANTENNA 75-ohm external terminal for RF inputs
VIDEO IN 1/2/3 S VIDEO (4-pin mini DIN) (VIDEO 1 only): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative /
C: 0.286 Vp-p (Burst signal), 75 ohms
VIDEO: 1 Vp-p, 75 ohms unbalanced, sync negative
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
COMPONENT IN 1/2 YP B P R (Component Video): Y: 1.0 Vp-p, 75 ohms unbalanced, sync negative / P B : 0.7 Vp-p, 75 ohms /
P R : 0.7 Vp-p, 75 ohms / Signal format: 480i, 480p, 720p, 1080i, 1080p
AUDIO: 500 mVrms (Typical) / Impedance: 47 kilohms
HDMI IN 1/2/3/4 HDMI: Video: 480i, 480p, 720p, 1080i, 1080p, 1080/24p / Audio: Two channel linear PCM 32, 44.1 and 48 kHz, 16, 20
and 24bits, Dolby Digital
AUDIO (HDMI IN 4 only): 500 mVrms (Typical) / Impedance: 47 kilohms
AUDIO OUT 500 mVrms (typical)
DIGITAL AUDIO OUT
(OPTICAL) PCM/Dolby Digital optical signal
PC IN D-sub 15-pin, analog RGB, 0.7 Vp-p, 75 ohms, positive
See the PC Input Signal Reference Chart on page 14.
PC AUDIO INPUT Stereo mini jack, 500 mVrms, (Typical) / Impedance: 47 kilohms
Power and others
Power requirement 120 V AC, 60 Hz
Power consumption
in use 160 W
in standby All models less than 0.1 W*
Screen size
(inches measured diagonally) 31.5
(32 class)
Display resolution 1,920 dots (horizontal) × 1,080 lines (vertical)
Speaker/Full range (2) (mm)
(inches) 42 Ч 150
1
3 / 4 Ч 5 7 / 8
Dimensions with stand (mm)
(inches)
809 Ч 584 Ч 242
31
7 / 8 Ч 23 Ч 9 5 / 8
without stand (mm)
(inches)
809 Ч 542 Ч 99
31
7
/ 8 Ч 21
3
/ 8 Ч 4
wall-mount hole pattern (mm) 200 × 200
wall-mount screw size M6 (length: refer to diagram on page 7)
Mass with stand (kg)
(lb.)
15.0
34.0
without stand (kg)
( lb. )
12.5
28.0
Supplied accessories Remote control RM-YD023 (1) / Size AA batteries (2) / Cable holder (1 attached to the Table-Top Stand) /
Operating Instructions (1) / Quick Setup Guide (1) / Warranty Card (1) / Safety and Regulatory Booklet (1) /
Attaching the Table-Top Stand (1)
Optional accessories Connecting cables / Support Belt Kit / Wall-Mount Bracket and TV Stand: see page 2