American Audio TT Record - Manual (Page 7)

QUICk-START
Turntable Quick-Start:
1. Changing Platter Speed
Use the RPM selectors (5 & 6) to change the platter speeds.
2. Start/Stopping Platter
Use the Start/Stop Button (7) to start and stop playback.
3. Pitch Control
1. The pitch adjustment is a fine adjustment to the platter's RPMs.
2. The pitch adjustment is variable and may be adjusted between -10% and +10% of the platter
selected speed.
3. The pitch is changed by sliding the Pitch Slider (3) in an up and down motion.
Product Service:
1. Clean the stylus periodically with a soft brush to prevent the accumulation of dust.
2. When sound becomes distorted or noisy, check the stylus. If the stylus is worn out, replace it
with a new one.
3. From time to time, the turntable should be wiped down with a soft, dry cloth.
4. Volatile materials should not be used, such as: alcohol, thinner, benzine etc. They may remove
the paint or damage the luster.
© American Audio ® - www.americanaudio.us - TT-Record™ Instruction Manual Page 7