Avenview SW-DVI-2X4 - Manual (Page 7)

www.avenview.com 7
1.9 DIP Switch
When remote control is not available, the SW-DVI-2X4 can be configured by DIP Switch:
- DIP Switch 1 should always be set to ON
- When you need to configure the SW-DVI-2X4 by DIP switch, set the DIP Switch 2 at ON. Set it to OFF
only when you need to control the device with provided remote control
DIP Switch 3 ON 3 OFF
4 ON Output 4 Output 3
4 OFF Output 2 Output 1
Rotary switch allows you to select an Input Source or a test pattern.
Rotary Switch Function
0 Source 1
1 Source 2
2 Pattern 1
3 Pattern 2
4 Reserved
5 Pattern 4
6 Pattern 5
7 Reserved