Troubleshooting your connection – Apple PowerBook G4 (15-inch, 1.67/1.5 GHz) User Manual
Page 93
92
Appendix C
Connecting to the Internet
7
In the Configure IPv4 pop-up menu, choose either Manually or Using DHCP.
 If you chose Manually, type the other information into the corresponding fields.
 If you chose Using DHCP, you don’t need to enter any further information unless your
system administrator has instructed you to do so.
8
Click AirPort and select options for joining an AirPort Extreme network after restarting
or when your computer wakes from sleep.
9
Click Apply Now.
Once you configure your AirPort settings, you are ready to connect.
To test your AirPort Extreme connection:
m
Click the AirPort status icon in the menu bar and choose Turn AirPort On.
Any AirPort Extreme network in range should appear in the menu.
Troubleshooting Your Connection
Cable Modem, DSL, and LAN Internet Connections
If you can’t connect to the Internet using your cable modem, DSL, or local area network
(LAN), see the following steps.
Important:
Instructions that refer to modems do not apply to LAN users. LAN users
may have hubs, switches, routers, or connection pods that cable and DSL modem users
do not. LAN users should contact their network administrator rather than an ISP.
LL3092.book Page 92 Friday, February 4, 2005 6:02 PM