Sony SRS-X5 User Manual

Page 59

Advertising

3. Start

“NFC Easy Connect” on the smartphone.

Make sure that the app screen is displayed.

4. Touch the speaker with the smartphone.

Unlock the screen of the smartphone beforehand.

Keep touching the smartphone on the N-Mark of the speaker until the smartphone responds.

If the speaker is off, the

(BLUETOOTH) indicator begins to flash when the smartphone touches it. When the

BLUETOOTH connection is established, the speaker turns on automatically.

Follow the on-screen instructions to establish the connection.

When the BLUETOOTH connection is established,

(BLUETOOTH) indicator stays lit.

To disconnect, touch the speaker with the smartphone again.

Hint

If you cannot connect the speaker, try the following.

Start the app on the smartphone, and move the smartphone slowly over the N-Mark of the speaker.

If the smartphone is in a case, remove the case.

Make sure that the app screen is displayed on the smartphone.

If you touch a smartphone on the speaker, the smartphone terminates BLUETOOTH connection with any current

device (NFC-compatible headset, etc.), and connects with the speaker (One-touch connection switching).