Sony DCR-TRV340 - Manual (Page 124)

124
– Except DCR-TRV240
You can record still images on “Memory Stick”s.
Before operation
Insert a “Memory Stick” into your camcorder.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Keep pressing PHOTO lightly until the desired still image appears. The green
z
mark stops flashing, then lights up. The brightness of the image and focus
are adjusted, being targeted for the middle of the image and are fixed.
Recording does not start yet.
(3) Press PHOTO deeper.
Recording is complete when the bar scroll indicator disappears.
The image when you pressed PHOTO deeper will be recorded on the
“Memory Stick.”
For DCR-TRV340 only
You can select the FIELD or FRAME mode in still image recording. Your camcorder
compensates for camera-shake when recording moving subjects in the FIELD mode.
Your camcorder records still images in high quality in the FRAME mode. Select the
FIELD or FRAME in the menu settings (p. 105).
Notes
•When recording fast-moving subjects in the FRAME mode, the recorded image blurry.
(DCR-TRV340 only)
•When recording in the FRAME mode, your camcorder may not correct camera-shake.
We recommend that you shoot objects with a tripod. (DCR-TRV340 only)
•When recording still images at step 2 with PHOTO pressed lightly, the image
momentarily flickers. This is not a malfunction.
Recording still images on “Memory
Stick”s – Memory Photo recording
[a] : Number of recorded images
[b] : Approximate number of images that can
be recorded on the “Memory Stick”.
3
2
1 / 12 STD
STD
PHOTO
PHOTO
1152
1152
1
C
AM
ER
A
M
EM
ORY
VC
R
O
FF
(C
H
G
)
PO
WER
[a][b]