Attaching the front panel, Inserting the disc in the unit, Ejecting the disc – Sony CDX-GT805DX User Manual

Page 5: Adjusting the angle of the front panel

Advertising
background image

5

Attaching the front panel

Place the hole A of the front panel onto the
spindle B on the unit, then lightly push the left
side in.
Press (SOURCE) on the unit (or insert a disc) to
operate the unit.

Note
Do not put anything on the inner surface of the front
panel.

Inserting the disc in the unit

1

Press Z.
The front panel slides down automatically.

2

Insert the disc (label side up).

The front panel slides up automatically, then
playback starts automatically.

Ejecting the disc

1

Press Z.
The front panel slides down automatically,
then the disc is ejected.

2

Press Z to close the front panel.

Note
The front panel slides up automatically after 15
seconds of the front panel sliding down.

Adjusting the angle of the front
panel

1

Press and hold (ANGLE) repeatedly
until the front panel is angled
accordingly.
The front panel can be set to 3 positions.

To return the front panel to its default position,
press and hold (ANGLE) repeatedly until the
front panel is returned to its default position.

Tips
After the front panel slides down (to insert the disc),

it returns to the position you set again automatically.

The front panel angle you set is stored in the unit.

When turning the ignition off, the angle returns to its
default position, then turning the ignition on, the front
panel is angled you set.

B

A

ANGLE

Advertising