Sony SA-NS300 - Manual (Page 14)

14 GB
How to Connect Your
Network
Set up the network after checking your
network environment. Refer to the following
descriptions.
Wireless Network:
Set up your network using the supplied
CD-ROM. Refer to the leaflet “Preparations
for listening to music via your home network”
for details.
Refer to option 1 when you set up your
network manually.
• Option 1: Manual wireless setup
WPS Compliant Wireless
Network:
• Option 2: WPS push button configuration
method (page 16)
• Option 3: PIN method (page 17)
Wired network:
• Option 4: DHCP method (page 18)
• Option 5: Fixed IP method (page 18)
Tip
You can set up a wireless network using a fixed IP
address. Refer to the instructions for a wired
network (page 18).
When a problem occurs while
you are making the network
settings
Press ALL RESET button on the bottom of the
unit with a pointed object (such as a small pin)
(page 10).
Setting Up Wireless
Networks
Your computer must be connected to the
wireless LAN router/access point in advance.
Write down important information such as the
SSID and security method, etc. of your
wireless LAN router/access point.
Refer to the operating instructions of the
router.
1
Check whether your computer
and wireless LAN router/
access point are turned on.
2
Connect the unit and the
wireless LAN router/access
point using a network (LAN)
cable.
3
Turn the unit on.
4
Click [My Network] or [Network]
t [SA-NS300].
The [Sony Network Device Setting]
screen appears.
Network Connections
Option 1: Manual wireless setup
SSID
Security method
Security key
(WEP/WPA key,
etc.)
Network
(LAN) cable