Installation examples, Satellite or cable box, ᕡ * ᕢ * ᕤ ᕥ ᕥ ᕣ – Sony SVR-3000 User Manual

Page 3

Advertising
background image

S-Video

Antenna

In

Audio

R

L

Video

A

B

OUT

Satellite

In

RF

Out

Ch

3/4

Serial

Control

Audio

OUT

S-Video

R L Video

Satellite Receiver

or cable box

SVR

Recorder

SATELLITE or CABLE BOX

INSTALLATION EXAMPLES

Connect Satellite or Cable Box to SVR

Recorder. Use either a composite cable alone
(shown), or connect an S-video cable and the L/R
audio (red and white) ends of a composite cable.

Connect the SVR Recorder to the TV . Use

either a composite cable alone (shown), or
connect an S-video cable and the L/R audio (red
and white) ends of a composite cable.

Control Cable Connection.

To record shows or display live TV, the SVR 3000
must change the channel on your cable box or
satellite receiver. To do so, it must send a signal
through either an IR (infrared) or serial control
cable. To connect a control cable, complete
either step

or step

, below.

If you have a DIRECTV

®

satellite receiver with

a serial input. Connect the serial control cable
from “Control Out-Serial” on the SVR Recorder to
your satellite box. Skip to step

.

If your cable or satellite box is not a DIRECTV

satellite reciever with a serial input: Plug the
metal end of the IR control cable into “Control
Out-IR” on the SVR Recorder (see the picture
below and to the left). Locate the IR sensor on
the front of the cable or satellite box. It’s usually
a tiny round bulb; if you shine a flashlight into
the plastic window on the front of the box, you
can see it. Mount the other two ends of the IR
cable (the IR emitters) in front of the IR sensor.
You can place the emitters above and below the
box. The emitters should stick out about 1.5”
from the front of the box. Use the provided
adhesive strips to secure the emitters.

Connect Phone and Power. See “Connect a

telephone line” and “Power on and tune your TV,”
in the far right panel.

*

*

OR

*

The cables shown in these

connections are only examples.
Use cables that will provide the
highest quality connections
available for your equipment.

extends 1½ "

Television

Satellite Receiver

or cable box

IR sensor
(Example only. Follow
instructions to the right to locate
your cable/satellite box's IR sensor)

Advertising