Sony SLV-M91HF - Manual (Page 33)

33
Hookup 6: The VCR Plus+ GOLD system channel setup
1
Press MENU, then select SET VCR Plus+
CHANNELS and push the cursor stick (OK).
2
Select AUTO and push the cursor stick (OK).
3
Press `/1 to turn off the VCR.
The VCR receives the program information signal from 0:00 am to 5:00 am
while the VCR is turned off, and set up the channel for the VCR Plus+
GOLD system recording. After channel setup is finished, you can record TV
programs using the VCR Plus+ GOLD system. For details, see page 54.
Notes
• To use the Smart Channel Mapping feature, set the A/B switch to “A”.
• It takes about 1 hour to complete channel setup.
• The VCR can receive the program information signal only while the VCR is turned
off and no timer recordings are set.
• If the channels in your area don’t carry the program information signals, set the
program guide channels manually. For details, see page 56.
• If the Choose your Cable CH MAP menu appears the first time you turn on the
VCR after finishing channel setup, select the MAP number. For details, see page 55.
The VCR Plus+ GOLD system channel setup for scrambled channels
To set the program guide channels for scrambled channels, enter all the
scrambled channels you want to record and the cable box output channel
(usually 2, 3, or 4) after finishing smart channel mapping. For details, see
page 56.
1 Find the VCR Plus+ GOLD system Channel
Line-up Chart in your program guide. For
details, see page 53.
MENU
ADVANCED OPTIONS
SMARTFILE EDIT
CLOCK SET
TUNER PRESET
TIMER SET / CHECK
LANGUAGE
CABLE BOX CONTROL
SET VCR Plus+ CHANNELS
SMART CHANNEL MAPPING
Use t o s e l e c t
Th e n p u s h OK
Pu s h MENU t o q u i t
AUTO MANUAL
continued