Sony VPL-VW85 - Manual (Page 21)

21
C
o
n
nec
tio
n
s an
d Pr
epa
ra
tio
n
s
To adjust the tilt of the installation surface
If the projector is installed on an uneven surface, use the adjusters to keep the projector
level.
• Pointing the projector at too high or too low of a tilt will result in trapezoidal distortion in the
projected image.
• Be careful not to catch your finger when turning the adjusters.
Note
Range of movement of
the projected picture
Projected Picture
H: Width of the projected picture
V: Height of the projected picture
Adjusters
Turn to adjust.