Sony GDM-C520K - Manual (Page 4)

4
Connecting the Artisan TM Sensor to your Computer
Attaching the Display Hood to your GDM-C520 Display
1 Unfold the hood.
2 Attach the hook and loop tabs to the underside of the display hood, as shown above.
3 Remove the liners protecting the adhesive on each hook and loop tab.
4 Wrap the hood around the display. Make sure that the hood is evenly aligned.
5 Fold the adhesive tabs inward the display, pressing firmly to ensure proper adhesion of the tabs to the underside of the display.
USB jack
Artisan TM Color
Reference Sensor
1
USB port
1 Connect the USB end of the Artisan TM Sensor to an open USB port on your
computer, or connect it through a peripheral device such as a keyboard or USB hub.
Note: Make sure that the sensor can be placed easily over the center
of your display screen, without stretching the sensor's cord.
Hook and loop tabs
INPUT 1 2 PICTURE EFFECT MENU OK
INPUT 1 2 PICTURE EFFECT MENU OK
1 3
4 5
2