Sony STR-DE345 - Manual (Page 9)

9 US
Getting Started
AC Hookups
Setting the voltage selector (except for
Singapore, Malaysia, Canada and Australia
models)
Check that the voltage selector on the rear panel of the
player is set to the local power line voltage. If not, set
the selector to the correct position using a screwdriver
before connecting the AC power cord to a wall outlet.
Connecting the AC power cord
Connect the AC power cord from this receiver and
from your audio/video components to a wall outlet.
Where do I go next?
Before you use the receiver, go to the next section to make
sure that all the controls are set to the appropriate positions.
to a wall outlet
,
VOLTAGE SELECTOR
(except Singapore, Malaysia,
Canada and Australia models)
Before You Use Your Receiver
Before turning on the receiver, make sure that you
have:
• Set the SPEAKERS button to ON.
Before you use your receiver for the first time or when
you want to clear the receiver's memory, do the
procedure below:
1
Turn off the receiver.
2
Press ?/1 (power) for more than 4 seconds.
“INITIAL” appears in the display and the items
including the following are reset or cleared:
• All preset stations are reset to their factory
settings.
• All sound field parameters are reset to their
factory settings.
• All index names (of preset stations and program
sources) are cleared.
• All adjustments made with the SET UP button are
reset to their factory settings.
• The sound field memorized for each program
source and preset station is cleared.
Turn on the receiver and check the following indicator.
• Press MUTING if the MUTING indicator turns on.
• Press DIMMER repeatedly to set the display at any
of four levels of brightness.
DIMMER
MUTING
? /1 (power)
120 V 240 V 220 V