Sony LBT-GPX555 - Manual (Page 21)

model name [LBT-GPX555 / MHC-GPX888/GPX555]
[4-485-746-11(2)] GB
21 GB
filename[D:\NORM'S JOB\SONY HA\SO130081\LBT-GPX555MHC-
GPX888_GPX555 (PMRF 01)\4485746112\06BAS.fm] masterpage:Right
USB T
ransf
e
r
You can transfer sound from an analog
audio source (other than CD, USB or
Bluetooth function) to a USB device.
Use the buttons on the unit to perform this
operation.
1
Connect a transferable USB
device to the
B port (page 20).
2
Press TUNER/BAND or AUDIO IN
repeatedly to select the source
you want to transfer.
3
Press REC TO USB B.
“PUSH ENTER” appears in the
display panel.
4
Press ENTER.
The transfer starts when “DON’T
REMOVE” appears in the display
panel.
5
Start playing the source.
To stop transfer
Press x.
To create a new MP3 file
Press REC TO USB B during Analog
Transfer.
“NEW TRACK” appears in the display
panel.
A new MP3 is also created automatically
after approximately 1 hour of transfer.
Notes
• When a new MP3 file is created, transfer is
disabled for the time being.
• If you press REC TO USB B again after a few
seconds, a new MP3 file can be created.
Use the buttons on the unit to perform this
operation.
1
Press USB/USB SELECT
repeatedly until “USB A” or
“USB B” lights up in the display
panel when playback is stopped.
2
Press ./> or +/–
repeatedly to select the audio
file or folder.
3
Press OPTIONS.
4
Press / to select “USB
ERASE”, then press ENTER.
“FOLDER ERASE” or “TRACK
ERASE” appears in the display panel.
5
Press ENTER.
“COMPLETE” appears in the display
panel.
To exit the options menu, press
OPTIONS on the unit.
When transferring to a USB device, a
“MUSIC” folder is created directly below
“ROOT”. Folders and files are generated
within this “MUSIC” folder according to
the transfer method and source as follows:
Synchronized Transfer
Transferring analog audio
(Analog Transfer) Erasing audio files or folders
from a USB device
Folder and file generation
rules
Source Folder name File name
Audio files Same as the source
AUDIO CD “CDDA0001”* “TRACK001”*