Vertical streaks such as white, black, red or purple appear on the image, or the
whole image on the screen becomes reddish when you are shooting a very bright
subject.

• The smear phenomenon is occurring. This phenomenon is not a malfunction.

Noise appears in the image when you view the screen in a dark place.

• The camera is attempting to increase the visibility of the screen by temporarily brightening the image

under conditions of low illumination. There is no effect on the recorded image.

The eyes of the subject come out red.

• Set [Red Eye Reduction] to [Auto] or [On] (page 58).
• Shoot the subject at a distance closer than the flash range using the flash.
• Light the room and shoot the subject.
• Retouch the image using [Retouch]

t [Red Eye Correction] in viewing menu (page 72), or correct

using “PMB”.

Dots appear and remain on the screen.

• This is not a malfunction. These dots are not recorded.

Cannot shoot images in succession.

• The internal memory or “Memory Stick Duo” media is full. Delete unnecessary images (page 36).
• The battery level is low. Insert charged battery pack.

The same image is shot several times.

• [REC Mode] is set to [Burst] (page 42). Or, [Scene Recognition] is set to [Advanced] (page 51).

The image taken in high-zoom is distorted.

• The image may become distorted when the weather is unstable, due to haze.

This is not a malfunction. You cannot know whether haze will occur or not while shooting. It is
recommended to check the taken image by using playback zoom after shooting.

Cannot play back images.

• Press the

(Playback) button.

• The folder/file name has been changed on your computer.

Viewing images

Continued

Advertising

Popular Brands

Popular manuals