Sony SDM-S53 - Manual (Page 7)

7
GB
x Connecting to an IBM PC/AT or compatible
computerp
x Connecting to a Macintosh computer
When connecting a Macintosh computer, use an adapter (not supplied),
if necessary. Connect the adapter to the computer before connecting the
video signal cable.
Setup 2: Connect the power cord
1 Connect the supplied power cord securely to the
monitor’s AC IN connector.
2 Connect the other end securely to a power outlet.
SDM-S53/S73
SDM-S93
IBM PC/AT or
compatible computer
to the HD 15
input connector
(analog RGB)
to the computer’s HD15 output
connector (analog RGB)
HD15-HD15 video signal
cable (analog RGB)
(supplied)
Macintosh computer
to the computer’s
HD15 output connector
(analog RGB)
HD15-HD15 video
signal cable (analog
RGB) (supplied)
to the HD 15
input connector
(analog RGB)
The illustration of the back of the monitor show here is that
of the SDM-S53.
The same applies for the SDM-S73 model.
to AC IN
to a power outlet
power cord (supplied)
1
2
to AC IN
to a power outlet
power cord (supplied)
1
2