Sony VPL-VW600ES - Manual (Page 39)

39
Installation Menu
U
s
ing t
h
e
M
e
n
u
s
When “Zone” is selected: Select the position to adjust with </,
buttons for the horizontal position (H position) and M/m buttons for
the vertical position (V position), then press .
Set the amount to adjust with </, buttons for the horizontal
direction (H direction) and with M/m buttons for the vertical
direction (V direction). You can select the position to adjust again by
pressing .
Reset: Returns to the factory settings.
Preset: The optimized data has been preset.
Depending on the adjustments made above, colors may become uneven
or the resolution may change.
Network Setting Perform internet protocol settings.
IP Address Setup Select the IP address setting method.
Auto (DHCP): The IP address is assigned automatically from the DHCP
server such as a router.
Manual: Specify the IP address manually.
When “Manual” is selected for “IP Address Setup,” select the item with
the
</, buttons and input the value with the M/m buttons. When all
items are entered, select “Apply,” and then press the button. The
entered settings will be registered.
IP Address Set the unit’s IP address.
Subnet Mask Set the unit’s subnet mask.
Default Gateway Set the unit’s default gateway.
MAC Address Display the unit’s MAC address. This cannot be changed.
Setting items Description
Note