Adder Technology AdderView CATx EPS-S8 - Manual (Page 73)
















Global Preferences
Global.preferences.are.available.only.to.
the.Admin.user.and.allow.settings.to.be.
made.that.affect.all.users.attached.to.the.
AdderView.CATx.
Autoscan Mode
Settings: SCAN LIST, ACTIVE PCs, ALL PCs
The.AdderView.CATx.supports.an.autoscan.mode.that.automatically.scans.
between.the.connected.computers.in.sequence..There.are.three.autoscan.
modes..In.the.first.mode.the.AdderView.CATx.will.scan.all.the.named.computers.
that.are.defined.in.the.autoscan.list.(SCAN.LIST)..The.computers.defined.in.the.
scan.list.may.be.connected.to.cascaded.AdderView.CATx.units..If.you.wish.to.
scan.the.ports.on.the.current.AdderView.CATx.then.you.may.select.ALL.the.
available.computers.or.just.the.available.computers.that.are.currently.powered.
on.(the.ACTIVE.computers)..Scanning.just.the.active.computers.avoids.blank.
screens.from.being.displayed.and.stops.the.monitor.from.going.into.a.power.
down.state.on.every.scan.cycle.
WARNING - Many modern monitors are fitted with automatic power save
relays and will switch off after a few seconds if connected to an inactive
PC. If you are using such a monitor you must not set the AdderView CATx
to scan ALL ports. Constant switching on and off of your monitor’s relay
will eventually damage your monitor. If you are using the SCAN LIST
option then you should ensure that all the computers are active if you are
using one of these monitors.
If.you.choose.to.use.the.SCAN.LIST.option.then.you.may.define.the.computers.
to.be.scanned.in.the.following.manner.
To define the autoscan list
Note: Ensure that you are
logged in as the ADMIN user.
1. From.the.main.on-screen.menu.press.F1.for.MORE.MENUS.
2. Select.EDIT.AUTOSCAN.LIST.from.the.menu..A.list.of.defined.computers.
will.appear..Computers.affixed.with.a.‘+’.will.be.autoscanned.during.the.
autoscan.cycle..To.add/remove.a.computer.to/from.the.autoscan.list,.move.
the.selection.bar.over.the.computer.name.and.press.SPACE.BAR..To.add.all.
named.computers.press.F1..To.remove.all.named.computers.press.F2.
3. When.all.the.computers.that.you.wish.to.scan.are.affixed.with.a.‘+’,.press.
RETURN.or.ENTER.to.save.the.selections..The.selected.computers.will.be.
autoscanned.in.alphabetical.order.when.you.activate.autoscan.mode.(when.
the.SCAN.LIST.option.is.selected).
Autoscan Period
Settings: DISABLED; 2, 5, 7, 15, 30 SECONDS, 1, 5 MINUTES..
The.autoscan.time.defines.the.length.of.time.that.the.AdderView.CATx.will.
display.video.(and.play.audio).from.an.autoscanned.computer.before.changing.
to.the.next.computer..If.the.DISABLED.setting.is.chosen.then.no.autoscan.
functions.will.be.available.
continued
ADDERVIEW CATx IP
Global Preferences
Mouse Switching : ENABLED
Screen Saver : DISABLED
Autoscan Mode : SCAN LIST
Autoscan Period : 5 SECONDS
OSD Dwell Time : 2 SECONDS
User Timeout : 2 SECONDS
RS232 Mouse Type : INTELLIMSE
Mouse Type : LOGITECH
Space-Toggle
-Up -Down Esc-Quit
To get here
1. From.a.local,.remote.or.global.keyboard,.
log.on.as.‘admin’.user.
2. Press. . . .(hotkeys.can.change).
3. Press. .to.select.‘More.menus’.
4. Select.‘Global.Preferences’..
Mouse Switching
Settings: ENABLED, DISABLED
The.computer.channel.can.be.switched.using.a.three.button.mouse.or.
IntelliMouse..Pressing.the.central.button.or.wheel.button.together.with.the.
left.hand.mouse.button.will.cause.the.AdderView.CATx.to.switch.to.the.next.
available.computer..When.mouse.switching.is.enabled.the.central.mouse.button.
or.wheel.mouse.button.is.allocated.to.control.the.AdderView.CATx.and.is.not.
therefore.available.for.use.by.computer.applications..If.you.want.to.use.the.
central.mouse.button.within.your.applications.you.will.need.to.disable.mouse.
switching..The.rotation.action.of.an.IntelliMouse.wheel.is.not.affected.and.is.
always.available.to.the.computer.application.
Screen Saver
Settings: DISABLED; 2, 5, 7, 10,15, 20 & 30 MINUTES
To.avoid.burning.out.the.phosphor.on.CRT.monitor.screens,.the.AdderView.
CATx.can.be.set.to.blank.the.screen.after.no.keyboard.or.mouse.activity.has.
been.detected.for.a.selected.timeout.period..If.preferred,.the.user.can.blank.
the.screen.manually.by.selecting.channel.‘0’.using.the.keyboard.hotkeys.or.by.
pressing.ESC.from.the.login.screen.