Sony PCV-RZ50CG - Manual (Page 51)

Connecting the Remote Sensor
The remote sensor communicates with the Media Center remote control, enabling you to change channels and to perform
other functions. If you are using a cable or satellite set-top box, you can connect the remote sensor control to the remote
sensor, which enables you to control the set-top box with the remote control.
1. Connect the remote sensor unit to a USB port located on either the front or back panel of your computer. Place
the remote sensor in a position that enables it to communicate with your remote control.
Connecting the rem ote sensor (back panel)
2. Plug the remote sensor control's cable into a jack (1 or 2) located on the back of the remote sensor.
When you attach the remote control sensor to a cable or satellite set-top box, you can control the set-top box
functions with your remote control.
Connecting the rem ote sensor and rem ote sensor control
3. Place the remote sensor control above the set-top box's infrared port:
1. Attach the double-sided adhesive tape to the top of the set-top box.
2. Press the remote sensor control onto the tape, ensuring that the front edge extends over the front of
the box, as shown in the following illustration.
Connecting the rem ote sensor control cable to a cable or satellite set- top box
Page 51