Sony VPL-HS1 - Manual (Page 40)

GB
40
Specifications
Ot
her
s
Specifications
System
Projection system
3 LCD panels, 1 lens, projection
system
LCD panel 0.7-inch TFT LCD panel,
1,440,000 pixels (480,000
pixels × 3)
Lens 1.3 times zoom lens (manual)
Lamp 120 W UHP type
Projection picture size
Range: 40 to 150 inches (measured
diagonally)
Color system NTSC 3.58 /PAL/SECAM/NTSC 4.43 /
PAL-M/PAL-N system,
switched automatically/
manually
Acceptable video signals
15k, DTV (480i/480p/1080i/720p)
Acceptable computer signals
fH: 19 to 72 kHz
fV: 48 to 92 Hz
Speaker Stereo speakers system, 33 mm
(1
5
/ 16 inches) diameter,
max. 2 W
×
2
Input/Output
Video input VIDEO: phono type
Composite video: 1 Vp-p ± 2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type (male)
Y (luminance): 1 Vp-p
± 2 dB
sync negative (75 ohms
terminated)
C (chrominance): burst 0.286
Vp-p
± 2 dB (NTSC)
(75 ohms terminated),
burst 0.3 Vp-p
± 2 dB (PAL)
(75 ohms terminated)
AUDIO Stereo minijack
500 mVrms, impedance more
than 47 kilohms
PJ MULTI 32-pin multi connector
Analog RGB/component:
R/C R (P R ): 0.7 Vp-p ±2 dB
(75 ohms terminated)
G: 0.7 Vp-p ±2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p ±2 dB
sync negative (75 ohms
terminated)
B/C
B (P B ): 0.7 Vp-p ±2 dB
(75 ohms terminated)
SYNC/HD: Composite sync
input: 1-5 Vp-p high impedance,
positive/ negative
Horizontal sync input: 1-5 Vp-p
high impedance, positive/
negative
VD: Vertical sync input: 1-5
Vp-p high impedance, positive/
negative
“Memory Stick” slot 1
General
Dimensions 340
Ч
154
Ч
300 mm
(13
1
/ 2
Ч
6
1
/ 8
Ч
11
7
/ 8 inches)
(w/h/d)
Mass Approx. 3.9 kg (8 lb 10 oz)
Power requirements
AC 100 to 240 V, 1.9-0.8 A,
50/60 Hz
Power consumption
Max. 190 W
(Standby mode: 5 W)
Supplied accessories
Remote control RM-PJHS1 (1)
Size AA (R6) batteries (2)
Signal interface cable SIC-HS10
(5 m) (1)
AC power cord (1)
Air filter (for replacement) (1)
Lens cap (1)
Operating Instructions (1)
Design and specifications are subject to change
without notice.