Sony KLV-S40A10 - Manual (Page 11)

Introducing the TV
11
Introd
ucin
g the
TV
Installing the TV
Preventing the TV
from Toppling Over Attaching the Support Belt
1
Screw the support belt (supplied) to the TV stand with the wood screw
(supplied).
2 Attach the support belt to the stand (TV), and anchor the belt with the
securing screw (supplied) using a coin, etc.
3 Adjust the length by pulling the support belt towards you while holding
the stand (TV).
When Mounting on a Wall
Be sure to use the optional wall-mount bracket (model: SU-PW2) to mount
the TV on a wall.
Refer to the Instruction Guide supplied with the wall-mount bracket on how
to mount the TV on the wall.
Be sure to take measures to prevent the TV from toppling over and
causing injury.
The supplied wood screw may not be used depending on the type of TV
stand. In this case, or when the securing strength is not enough,
prepare commercial screws to fit to the TV stand. Use commercial
screws of 3 to 4 mm (
1
/
8
to
3
/
16
inches) diameter. Consult your dealer
about the types of screw.